How to Install and Activate Altera Quartus II 13.1 for Windows
Altera Quartus II is a software tool for designing and programming FPGA devices. It supports a wide range of Altera devices, including the Cyclone III series. However, the latest versions of Quartus II do not support these older devices, so you may need to use an older version of Quartus II, such as 13.1, to work with your project.
In this article, I will show you how to download, install and activate Altera Quartus II 13.1 for Windows. This is a full version of the software that does not require a license or a crack. You can use it for free for educational or personal purposes.
altera quartus ii 13.1 crack
Step 1: Download the software and device support files
The first step is to download the software and device support files from the Intel website. You can find them at this link[^2^]. You will need to download two files: the software .tar file and the appropriate device support files for your FPGA device. For example, if you are using a Cyclone III device, you will need to download the Cyclone III device support file.
The software .tar file is about 2.4 GB in size, and the device support files vary depending on your device. Depending on your download speed, it may take some time to download these files.
Step 2: Extract the files into the same directory
The next step is to extract the files into the same temporary directory. You can use any software that can extract .tar files, such as WinRAR or 7-Zip. Make sure you extract both files into the same directory.
Step 3: Run the setup.bat file
The final step is to run the setup.bat file that is located in the extracted directory. This will launch the installation wizard that will guide you through the installation process. You can choose the default options for most of the steps, except for the following:
When asked to select components to install, make sure you select the device support files that match your FPGA device.
When asked to enter a license file or a license server, choose \"Do not specify a license file\". This will allow you to use the software without a license or a crack.
When asked to register your product, choose \"Skip registration\". This will skip the registration process and avoid any potential issues with activation.
After completing these steps, you should have Altera Quartus II 13.1 installed and activated on your Windows computer. You can now launch the software and start designing and programming your FPGA projects.Step 4: Create a new project
Once you have installed and activated Altera Quartus II 13.1, you can create a new project for your FPGA device. To do this, follow these steps:
Launch Altera Quartus II 13.1 from the Start menu or the desktop shortcut.
Click on File > New Project Wizard to open the New Project Wizard.
Click Next to proceed to the first page of the wizard.
Enter a name and a location for your project. You can also choose a template or a tutorial project if you want.
Click Next to proceed to the second page of the wizard.
Select your FPGA device from the list of available devices. You can use the filters to narrow down your search. Make sure you select the correct device family, package, speed grade and temperature range for your device.
Click Next to proceed to the third page of the wizard.
Add any source files that you want to include in your project. You can add Verilog, VHDL, schematic or other types of files. You can also create new files or import existing files from other projects.
Click Next to proceed to the fourth page of the wizard.
Specify any simulation settings for your project. You can choose the simulation tool, the testbench file, the simulation format and other options.
Click Next to proceed to the fifth page of the wizard.
Review the summary of your project settings and click Finish to create your project.
You should now see your project in the Project Navigator window. You can edit your source files, compile your design, simulate your design and program your device from this window.
Step 5: Compile your design
The next step is to compile your design and check for any errors or warnings. To do this, follow these steps:
In the Project Navigator window, click on Processing > Start Compilation to start the compilation process.
Wait for the compilation to finish. You can monitor the progress and status of the compilation in the Messages window.
If there are any errors or warnings in your design, they will be displayed in the Messages window. You can double-click on any message to jump to the source file and line where the error or warning occurred.
Fix any errors or warnings in your design and recompile until there are no more errors or warnings.
When the compilation is successful, you should see a green check mark next to your project name in the Project Navigator window. You should also see a report of the compilation results in the Compilation Report window. You can view various information about your design, such as resource usage, timing analysis, power analysis and pin assignments in this window.
Step 6: Program your device
The final step is to program your FPGA device with your compiled design. To do this, follow these steps:
Connect your FPGA device to your computer using a USB cable or another interface.
In the Project Navigator window, click on Tools > Programmer to open the Programmer window.
Click on Hardware Setup to select your hardware interface and device.
Click on Auto Detect to detect your FPGA device and add it to the list of available devices.
Select your FPGA device from the list and click on Add File to add your compiled design file (.sof) to the device.
Check the Program/Configure option for your device and click on Start to program your device with your design.
Wait for the programming to finish. You should see a green check mark next to your device name when it is done.
You have now programmed your FPGA device with your design. You can test it by observing its behavior or using external devices such as LEDs, switches or sensors. You can also modify your design and reprogram your device as many times as you want. 29c81ba772